Dwell meter manual

Checking the dwell angle. 1. Remove the covers from the test tips; insert the multimeter’s black lead to COM socket (J), and the multimeter’s red lead to the V revolutions per minute socket. 2. Set the rotary switch to operate/vary (F) to the specified DWELL range .  · The last meter that I had like yours, I seem to remember like Nick said there would be a red and black for battery and typically a green lead for the coil to check the dwell. I am guessing that the shunt lead might be used to check output for maybe the generator. Tach-Dwell Switch;Black bakelite control knob, with 5 positions: OFF-CAL. -6 CYL. -OFF: RPM and DWELL Meters turned off. 8 CYL. -4 CYL. CAL: In this position the DWELL METER pointer should be set on the SET LINE. 6 CYL: Place in this position for a 6-lobe distributor. 8 CYL: Place in this position for an 8-lobe distributor.

Measure the dwell angle while cranking the engine. At cranking speeds, the pointer on the meter will vibrate. Use the reading half way between the extremes of the vibrating pointer as the dwell angle measurement. INTRODUCTION. This manual covers DESCRIPTION, The test set has two test set,tachometer-dwell. panel meters which simultaneously dis-The manual play the engine r.p.m. and dwell angle. contains instructions for operation andThe tachometer operates off of an in-maintenance of the test set. direct secondary impulse pickup which A dwell meter measures the angle of rotation of the cam through which the points are opened and closed, and registers the dwell angle - the period when they are closed. What gap should points be set at?.

11 мар. г. I acquired an Accurate Instrument BT dwell meter but unfortunately it did not include an instruction manual. 18 окт. г. A feeler gauge can produce inaccurate recordings when measuring worn points. If you happen to have a Motors Manual there is good info in the. 12 сент. г. MARQUETTE DWELL AND TACH TESTER MANUAL PDF DOWNLOAD MARQUETTE DWELL AND TACH TESTER MANUAL PDF READ ONLINE dwell meter napa 6 volt d.